No Ip Routing - Enterasys N Standalone (NSA) Series Configuration Manual

IP Configuration Command Set
Managing Router Configuration Files
12.2.2.3

no ip routing

Use this command to disable IP routing on the device and remove the routing configuration. By
default, IP routing is enabled when interfaces are configured for it as described in
no ip routing
Syntax Description
None.
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router1(config)#
Command Defaults
None.
Example
This example shows how to disable IP routing on the device:
Matrix>Router1(config)#no ip routing
12-16 Matrix NSA Series Configuration Guide
Section 12.2.1.