Show Spantree Newroottrapendable - Enterasys N Standalone (NSA) Series Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.71

show spantree newroottrapendable

Use this command to display the state of the Spanning Tree new root trap function.
show spantree newroottrapenable
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of the new root trap function:
Matrix(rw)->show spantree newroottrapenable
New Root Trap is set to enable
6-84 Matrix NSA Series Configuration Guide