Enterasys N Standalone (NSA) Series Configuration Manual page 1042

IP Configuration Command Set
Configuring Dynamic Host Configuration Protocol (DHCP)
12.2.9.16 host
Use this command to specify an IP address and network mask for manual DHCP binding.
host address [mask | prefix-length]
Syntax Description
address
mask |
prefix-length
Command Syntax of the "no" Form
The "no" form of this command removes the client IP address:
no host
Command Type
Router command.
Command Mode
DHCP Pool Configuration mode: Matrix>Router1(config-dhcp-pool)#
Command Defaults
If not specified, DHCP server will examine its defined IP address pools for a mask
or prefix-length. If no mask is found in the IP address pool database, the Class A,
B, or C natural mask will be used.
Example
This example shows how to set 15.12.1.99 255.255.248.0 as the IP address and subnet mask of a
client in the "localpool" address pool:
Matrix>Router1(config)#ip dhcp pool localpool
Matrix>Router1(config-dhcp-pool)#hardware-address 0001.f401.2710
Matrix>Router1(config-dhcp-host)#host 15.12.1.99 255.255.248.0
12-130 Matrix NSA Series Configuration Guide
Specifies the IP address of the DHCP client.
(Optional) Specifies a network mask or prefix for the IP
address.