Port Configuration Command Set
Setting Auto-Negotiation and Advertised Ability
4.3.6.6
show port advertise
Use this command to display the advertised ability on one or more ports.
show port advertise [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, advertised ability for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display advertised ability fe.1.16:
Matrix(rw)->show port advertise fe.1.16
fe.1.16
----------------------------------------------
10BASE-T
10BASE-TFD
100BASE-TX
100BASE-TXFD
1000BASE-X
1000BASE-XFD
1000BASE-T
1000BASE-TFD
other
pause
Apause
Spause
Bpause
Table 4-3
4-56 Matrix NSA Series Configuration Guide
(Optional) Displays advertised ability for specific port(s).
For a detailed description of possible port-string values,
refer to
Section
capability
yes
yes
yes
yes
no
no
no
no
no
yes
no
no
no
provides an explanation of the command output.
4.1.1.
advertised
remote
yes
no
yes
no
yes
no
yes
no
no
no
no
no
no
no
no
no
no
yes
yes
no
no
no
no
no
no
no