Show Spantree Txholdcount - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.1.48

show spantree txholdcount

Use this command to display the maximum BPDU transmission rate.
show spantree txholdcount
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the transmit hold count setting:
Matrix(rw)->show spantree txholdcount
Tx hold count = 3.
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-61