Show Snmp User - Enterasys N Standalone (NSA) Series Configuration Manual

5.3.2.1

show snmp user

Use this command to display information about SNMP users. These are people registered to access
SNMP management.
show snmp user [list] | [user] | [remote remote ] [volatile | nonvolatile |
read-only]
Syntax Description
list
user
remote remote
volatile |
nonvolatile |
read-only
Command Defaults
•
•
•
•
Command Type
Switch command.
Command Mode
Read-Only.
(Optional) Displays a list of registered SNMP user
names.
(Optional) Displays information about a specific user.
(Optional) Displays information about users on a specific
remote SNMP engine.
(Optional) Displays user information for a specified
storage type.
If list is not specified, detailed SNMP information will be displayed.
If user is not specified, information about all SNMP users will be displayed.
If remote is not specified, user information about the local SNMP engine will
be displayed.
If not specified, user information for all storage types will be displayed.
SNMP Configuration Command Set
Configuring SNMP Users, Groups and Communities
Matrix NSA Series Configuration Guide 5-13