Enterasys N Standalone (NSA) Series Configuration Manual page 194

Discovery Protocols Command Set
Cisco Discovery Protocol
Examples
This example shows how to set the Cisco DP port voice VLAN ID to 3 on port fe.1.6 and enable
the port operational state:
Matrix>set ciscodp port status enable vvid 3 fe.1.6
This example shows how to set the Cisco DP extended trust mode to untrusted on port fe.1.5 and
set the CoS priority to 1:
Matrix>set ciscodp port trust-ext untrusted cos-ext 1 fe.1.5
3-22 Matrix NSA Series Configuration Guide