Enterasys N Standalone (NSA) Series Configuration Manual page 948

IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
Example
This example shows how to display IP protocol information. In this case, the routing protocol is RIP
(Routing Information Protocol). For more information on configuring RIP parameters, refer to
Section 13.2.2:
Matrix>Router1#show ip protocols
Routing Protocol is "rip"
12-36 Matrix NSA Series Configuration Guide
Sending updates every 30 seconds
Next due in 19 seconds
Invalid after 180 seconds, hold down 120, flushed after 300
Incoming update filter list for all interfaces is not set
Outgoing update filter list for all interfaces is not set
Default Version Control:
Interface
Vlan 1
Vlan 2
Routing for Networks:
182.127.0.0
Routing Information Sources:
Gateway Distance
Distance: (default is 1)
Send Recv
1 1
1 1
Last Update
Key-chain