Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3.2.4.21
clear lldp port trap
Use this command to return the port LLDP trap setting to the default value of disabled.
clear lldp port trap port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-write.
Example
This example returns port ge.1.1 to the default LLDP trap state of disabled.
Matrix(rw)->clear lldp port trap ge.1.1
3-58 Matrix NSA Series Configuration Guide
Specifies the port or range of ports to be affected.