Show Ip Protocols - Enterasys N Standalone (NSA) Series Configuration Manual

12.2.6.1

show ip protocols

Use this command to display information about IP protocols running on the device.
show ip protocols
NOTE: Enabling CIDR for RIP on the Matrix Series device requires using the no
auto-summary command (as described in
summarization.
Syntax Description
None.
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
None.
IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
Section 13.2.2.16) to disable automatic route
Matrix NSA Series Configuration Guide 12-35