Enterasys N Standalone (NSA) Series Configuration Manual page 264

Port Configuration Command Set
Reviewing Port Status
Examples
This example shows how to display all counter statistics, including MIB2 network traffic and traffic
through the device for fe.3.1:
Matrix(rw)->show port counters fe.3.1
Port: fe.3.1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets
In Unicast Pkts
In Multicast Pkts
In Broadcast Pkts
In Discards
In Errors
In Unknown Protocol
Out Octets
Out Unicasts Pkts
Out Multicast Pkts
Out Broadcast Pkts
Out Errors
Out Queue Length
802.1Q Switch Counters
----------------------
Frames Received
Frames Transmitted
Frames Filtered
This example shows how to display all fe.3.1 port counter statistics related to traffic through the
device.
Matrix(rw)->show port counters fe.3.1 switch
Port: fe.3.1
No counter discontinuity time
802.1Q Switch Counters
-------------------------------------------
Frames Received
Frames Transmitted
Frames Filtered
4-28 Matrix NSA Series Configuration Guide
MIB2 Interface: 1
Bridge Port: 2
Bridge Port: 2
0
0
0
0
0
0
0
0
0
0
0
0
256
0
0
0
0
0
0