Port Configuration Command Set
Setting Auto-Negotiation and Advertised Ability
4.3.6.4
set port mdix
Use this command to set MDI/MDIX mode on one or more ports.
set port mdix [port-string] {auto | mdi | mdix}
Syntax Description
port-string
auto
mdi
mdix
Command Defaults
If port-string is not specified, mode will be set for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to force 1-Gigabit Ethernet port 14 in port group 3 to MDIX
configuration:
Matrix(rw)->set port mdix ge.3.14 mdix
4-54 Matrix NSA Series Configuration Guide
(Optional) Sets mode for specific port(s). For a detailed
description of possible port-string values, refer to
Section
4.1.1.
Sets port(s) to automatically determine MDI/MDIX.
Forces port(s) to MDI configuration.
Forces port(s) to MDIX configuration.