Show Port Status - Enterasys N Standalone (NSA) Series Configuration Manual

4.3.2.2

show port status

Use this command to display operating and admin status, speed, duplex mode and port type for one
or more ports on the device.
show port status [port-string] [-interesting]
Syntax Description
port-string
-interesting
Command Defaults
If no options are specified, status information for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display status information for port ge.3.1 through 4:
Matrix(rw)->show port status ge.3.1-4
Port Alias
(truncated)
------------ --------------
ge.3.14
Table 4-1
(Optional) Displays status for specific port(s). For a
detailed description of possible port-string values, refer to
Section 4.1.1.
(Optional) Displays only ports with an operational status of
up or dormant.
Oper
Status
-------
up
provides an explanation of the command output.
Admin Speed
Status
------- --------
up 1 Gbps
Matrix NSA Series Configuration Guide
Port Configuration Command Set
Reviewing Port Status
Duplex Type
------- -------------
full 1000-SX MT-RJ
4-25