Arp Timeout - Enterasys N Standalone (NSA) Series Configuration Manual

12.2.4.7

arp timeout

Use this command to set the duration (in seconds) for entries to stay in the ARP table before
expiring. The device can support up to 2000 outstanding unresolved ARP entries.
arp timeout seconds
Syntax Description
seconds
Command Syntax of the "no" Form
The "no" form of this command restores the default value of 14,400 seconds:
no arp timeout seconds
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router1(config)#
Command Defaults
None.
Example
This example shows how to set the ARP timeout to 7200 seconds:
Matrix>Router1(config)#arp timeout 7200
Specifies the time in seconds that an entry remains in the
ARP cache. Valid values are 0 - 65535. A value of 0
specifies that ARP entries will never be aged out.
Matrix NSA Series Configuration Guide
IP Configuration Command Set
Reviewing and Configuring the ARP Table
12-27