Set Console Flowcontrol - Enterasys N Standalone (NSA) Series Configuration Manual

Port Configuration Command Set
Setting Console Port Properties
4.3.1.7

set console flowcontrol

Use this command to set the type of flow control for one or more console ports.
set console flowcontrol {none | ctsrts | dsrdtr} [port-string]
Syntax Description
none
ctsrts
dsrdtr
port-string
Command Defaults
If port-string is not specified, flow control will be set for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable DSR/DTR flow control for console port com.1.1:
Matrix(rw)->set console flowcontrol dsrdtr com.1.1
4-12 Matrix NSA Series Configuration Guide
Disables all hardware flow control.
Enables CTS/RTS (Clear to Send/Request to Send) hardware
flow control.
Enables DSR/DTR (Data Set Ready/Data Terminal Ready)
hardware flow control.
(Optional) Sets flow control for specific console port(s).