Setting Speed And Duplex Mode - Enterasys N Standalone (NSA) Series Configuration Manual

4.3.4

Setting Speed and Duplex Mode

Purpose
To review and set the operational speed in Mbps and the default duplex mode: Half, for half duplex,
or Full, for full duplex for one or more ports.
NOTE: These settings only take effect on ports that have auto-negotiation disabled.
Commands
The commands used to review and set port speed and duplex mode are listed below and described
in the associated section as shown.
•
show port speed
•
set port speed (Section
•
show port duplex
•
set port duplex (Section
(Section 4.3.4.1)
4.3.4.2)
(Section 4.3.4.3)
4.3.6)
Port Configuration Command Set
Setting Speed and Duplex Mode
Matrix NSA Series Configuration Guide 4-41