10.4.2.6
show igmp config
Use this command to display IGMP configuration information for one or more VLANs.
show igmp config vlan-list
Syntax Description
vlan-list
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display IGMP configuration information for VLAN 1:
Matrix(rw)->show igmp config 1
IGMP config for vlan 1
VlanQueryInterval
VlanStatus
Vlan IGMP Version
VlanQuerier
VlanQueryMaxResponseTime
VlanRobustness
VlanLastMemberQueryIntvl
VlanQuerierUpTime
Table 10-1
the set igmp config command to set these parameters, refer to
Specifies the VLAN(s) for which to display IGMP
configuration information.
shows a detailed explanation of command output. For details on using
IGMP Configuration Command Set
- 125
- Active
- 2
- 134.141.22.1
- 10
- 2
- 10
- 24039
Matrix NSA Series Configuration Guide
Configuring IGMP
Section
10.4.2.7.
10-13