Clear Linkflap - Enterasys N Standalone (NSA) Series Configuration Manual

4.3.8.12

clear linkflap

Use this command to clear all link flap options and / or statistics on one or more ports.
clear linkflap {all | stats [port-string] | parameter port-string {threshold |
interval | downtime | all}
Syntax Description
all | stats
parameter
threshold |
interval |
downtime | all
port-string
Command Defaults
If port-string is not specified, settings and/or statistics will be cleared on all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to clear all link flap options on port fe.1.4:
Matrix(rw)->clear linkflap all fe.1.4
Configuring Link Traps and Link Flap Detection
Clears all options and statistics, or clears only statistics.
Clears link flap parameters.
Clears link flap threshold, interval, downtime or all
parameters.
(Optional unless parameter is specified) Specifies the
port(s) on which to clear settings. For a detailed description
of possible port-string values, refer to
Matrix NSA Series Configuration Guide
Port Configuration Command Set
Section 4.1.1.
4-81