IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12.2.8.23 show ip slb sticky
Use this command to display server load balancing active sticky connections.
show ip slb sticky [client ip-address]
Syntax Description
client ip-address
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
If client is not specified, all server load balancing active sticky connections are
displayed.
Examples
This example shows how to display all server load balancing active sticky connections.
Matrix>Router1#show ip slb sticky
client-ip
------------------------------------------------------------------------
192.170.1.253
192.168.1.90
12-104 Matrix NSA Series Configuration Guide
(Optional) Display sticky connections for a particular client.
real-server-ip
192.169.1.11
192.169.2.14
conns
*
*
ftp-cntrl
2
0