General Configuration Command Set
Setting Basic Device Properties
2.2.3.7
show system
Use this command to display system information, including contact information, power and fan tray
status and uptime.
show system
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display system information:
Matrix(rw)->show system
System contact:
System location:
System name:
PS1-Status
-------------
ok
Fan1-Status
-------------
ok
Temp-Alarm
-------------
off
PS1-Type
-------------
6C207-1
Table 2-6
2-50 Matrix NSA Series Configuration Guide
PS2-Status
-------------
not installed
Uptime d,h:m:s
--------------
0,19:40:00
PS2-Type
-------------
not installed
provides an explanation of the command output.
Logout
-------------
10 min