Enterasys N Standalone (NSA) Series Configuration Manual page 942

IP Configuration Command Set
Configuring Broadcast Settings
12.2.5.1 ip directed-broadcast
Use this command to enable or disable IP directed broadcasts on an interface.
ip directed-broadcast
Syntax Description
None.
Command Syntax of the "no" Form
The "no" form of this command disables IP directed broadcast globally:
no ip directed-broadcast
Command Type
Router command.
Command Mode
Interface configuration: Matrix>Router1(config-if(Vlan 1))#
Command Defaults
None.
Example
This example shows how to enable IP directed broadcasts on VLAN 1:
Matrix>Router1(config)#interface vlan 1
Matrix>Router1(config-if(Vlan 1))#ip directed-broadcast
12-30 Matrix NSA Series Configuration Guide