Show Cos Unit - Enterasys N Standalone (NSA) Series Configuration Manual

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8.3.3.4

show cos unit

Use this command to display Class of Service units of measure information, including rate type,
minimum and maximum limits of the port groups, and their respective granularity.
show cos unit [irl | txq] [port-type index] [percentage | kbps | mbps | gbps]
Syntax Description
irl | txq
port-type index
percentage | kbps |
mbps | gbps
Command Defaults
If not specified, all rate limiting information for all port types and CoS units of
measure will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to show all Class of Service IRL unit of measure information:
Matrix(rw)->show cos unit irl
Port Type
---------
0
0
0
0
1
1
1
1
8-52 Matrix NSA Series Configuration Guide
(Optional) Displays inbound rate limiting or transmit
queue information.
(Optional) Displays information for a specific port type.
Displays the unit of measure as percentage of total
bandwidth, or kilobits, megabits, or gigabits per second.
Type Unit Maximum Rate
---- ---- ------------
irl Gbps 10
irl Mbps 10000
irl Kbps 10000000
irl perc 100
irl Gbps 10
irl Mbps 10000
irl Kbps 10000000
irl perc 100
Minimum Rate Granularity
------------ -----------
1 1
1 1
1
1 1
1 1
1 1
1
1 1