Show Ip Slb Vservers - Enterasys N Standalone (NSA) Series Configuration Manual

12.2.8.12 show ip slb vservers

Use this command to display server load balancing virtual server information.
show ip slb vservers [detail | virtserver-name [detail]]
Syntax Description
detail
virtserver-name
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
If no parameters are entered, summary information about all configured virtual
servers will be displayed.
If detail is not specified, summary information will be displayed.
Examples
This example shows how to display summary information about all LSNAT virtual servers:
Matrix Router1(config)#>show ip slb vservers
virt-serv
------------------------------------------------------------------------------
telnet
wftpd
five
test
Configuring Load Sharing Network Address Translation (LSNAT)
(Optional) Displays detailed output for a specific virtual
server or for all configured virtual servers.
(Optional) Specifies a virtual server name for which to
display information.
vserv
vserv-ip-addr
192.169.10.1
192.169.10.3
3.3.3.3
192.169.10.88
port server-farm
23 matrix
21 ftpserver
80 ten
80 big
Matrix NSA Series Configuration Guide
IP Configuration Command Set
persistence
type level ins
STICKY 200 IS
SSL 240 IS
TCP 41 IS
TCP 240 IS
service
name
ftp
12-87