Set Ip Address - Enterasys N Standalone (NSA) Series Configuration Manual

2.2.3.2

set ip address

Use this command to set the system IP address, subnet mask and default gateway.
set ip address ip-address [mask ip-mask] [gateway ip-gateway]
Syntax Description
ip-address
mask ip-mask
gateway ip-gateway (Optional) Sets the system's default gateway (next-hop
Command Defaults
If not specified, ip-mask will be set to the natural mask of the ip-address and
ip-gateway will be set to the ip-address.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system IP address to 10.1.10.1 with a mask of 255.255.128.0
and a default gateway of 10.1.0.1:
Matrix(rw)->set ip address 10.1.10.1 mask 255.255.128.0 gateway 10.1.10.1
Sets the IP address for the system.
(Optional) Sets the system's subnet mask.
device).
Matrix NSA Series Configuration Guide
General Configuration Command Set
Setting Basic Device Properties
2-45