VLAN Configuration Command Set
Enabling/Disabling GVRP
7.3.6.6
clear garp timer
Use this command to reset GARP timers back to default values.
clear garp timer {[join] [leave] [leaveall]} port-string
Syntax Description
join
leave
leaveall
port-string
Command Defaults
At least one optional parameter must be entered.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the GARP leave timer to 60 centiseconds on Fast Ethernet port 5
in port group 2:
Matrix(rw)->clear garp timer leave fe.2.5
7-44 Matrix NSA Series Configuration Guide
(Optional) Resets the join timer to 20 centiseconds.
(Optional) Resets the leave timer to 60 centiseconds.
(Optional) Resets the leaveall timer to 1000 centiseconds.
Specifies the port(s) on which to reset GARP timer(s). For a
detailed description of possible port-string values, refer to
Section
4.1.1.