Port Configuration Command Set
Setting Speed and Duplex Mode
4.3.4.3
show port duplex
Use this command to display the default duplex setting (half or full) for one or more ports.
show port duplex [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, default duplex settings for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the default duplex setting for 1-Gigabit Ethernet port 14 in port
group 3:
Matrix(rw)->show port duplex ge.3.14
default duplex mode is full on port ge.3.14.
4-44 Matrix NSA Series Configuration Guide
(Optional) Displays default duplex setting(s) for
specific port(s). For a detailed description of possible
port-string values, refer to
Section
4.1.1.