Enterasys N Standalone (NSA) Series Configuration Manual page 969

Table 12-5 show ip pim interface Output Details (Continued)
Output
Nbr-Count
Query-Intvl
DR-Prior
DR
What It Displays...
Total number of PIM neighbors on the interface, discovered
by receiving PIM hello messages from other PIM routers on
the interface.
Interval between Hello messages. Default is 30 seconds.
Designated router priority value on the interface. Set with
the ip pim dr-priority command
IP address of the designated router on the LAN.
Matrix NSA Series Configuration Guide
IP Configuration Command Set
Configuring PIM
(Section 12.2.7.3).
12-57