Enterasys N Standalone (NSA) Series Configuration Manual page 847

Table 11-12 show ip route Output Details (Continued)
Output
Flags
Refcnt
Use
Interface
Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
What It Displays...
Route status. Possible values and their definitions include:
U - route is usable (that is, "up")
G - destination is a gateway
H - host specific routing entry
R - host or net unreachable
D - created dynamically (by redirect)
M - modified dynamically (by redirect)
d - message confirmed
C - generate new routes on use
X - external daemon resolves name
L - generated by ARP
S - manually added (static)
1 - protocol specific routing flag
2 - protocol specific routing flag
Number of hosts referencing this address.
Number of packets forwarded via this route.
Interface type.
Matrix NSA Series Configuration Guide 11-105