Set Logging Application - Enterasys N Standalone (NSA) Series Configuration Manual

Logging And Network Management Command Set
Configuring System Logging
11.2.1.9

set logging application

Use this command to set the severity level of log messages and the server(s) to which messages will
be sent for one or all applications.
set logging application {[mnemonic | all]} [level level] [servers servers]
Syntax Description
mnemonic
all
level level
servers servers
NOTE:
Table 11-3.
11-16 Matrix NSA Series Configuration Guide
Mnemonic values are case sensitive and must be typed as they appear in
Specifies a case sensitive mnemonic abbreviation of an
application to be logged. This parameter will vary
depending on the number and types of applications
running on your system. To display a complete list, use the
show logging application command as described in
Section 11.2.1.8. Sample values and their corresponding
applications are listed in
Sets the logging severity level for all applications.
(Optional) Specifies the severity level at which the server
will log messages for applications. Valid values and
corresponding levels are:
1 - emergencies (system is unusable)
2 - alerts (immediate action required)
3 - critical conditions
4 - error conditions
5 - warning conditions
6 - notifications (significant conditions)
7 - informational messages
8 - debugging messages
(Optional) Specifies index number(s) of the Syslog
server(s) to which messages will be sent. Valid values are
1 - 8 and are set using the set logging server command
(Section 11.2.1.3).
Table 11-3.