Table of Contents
Advertisement
10.4.2.12 set igmp remove-static
Use this command to delete a static IGMP entry, or to remove one or more ports from an existing
entry.
set igmp remove-static group vlan-list [modify] [include-ports] [exclude-ports]
Syntax Description
group
vlan-list
modify
include-ports
exclude-ports
Command Defaults
If not specified, the static entry will be removed and not modified.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove port fe.1.3 from the IGMP group at 224.0.2 (VLAN 105):
Matrix(rw)->set igmp remove-static 224.0.0.2 105 modify
include-ports fe.1.3
Specifies a group IP address for the entry.
Specifies the VLAN(s) on which to configure the entry.
Adds new ports to an existing entry.
Port or range of ports
Port or range of ports
Matrix NSA Series Configuration Guide
IGMP Configuration Command Set
Configuring IGMP
10-21
Advertisement
Chapters
Table of Contents
