2.2.12.1
show support
Use this command to display output for technical support-related commands.
show support [filename]
Syntax Description
filename
Command Defaults
The following commands are executed:
•
show version
•
show system hardware
•
show vlan
(Section
•
show vlan static
•
show logging all
•
show snmp counters
•
show port status
•
show spantree status
•
show spantree blockedports
•
show ip address
•
show ip route
•
show netstat
•
show arp
(Section
•
show system utilization
•
show config
(Section
Command Type
Switch command.
Command Mode
Read-Only.
(Section
2.2.3.25)
(Section
2.2.3.8)
7.3.1.1)
(Section
7.3.1.1)
(Section
11.2.1.1)
(Section
5.3.1.2)
(Section
4.3.2.2)
(Section
6.2.1.1)
(Section
(Section
2.2.3.1)
(Section
11.2.5.6)
(Section
11.2.2.4)
11.2.5.1)
(Section
2.2.8.3)
(Optional) Filename (slotN/name) to save output.
6.2.2.9)
2.2.3.9)
Matrix NSA Series Configuration Guide
General Configuration Command Set
Gathering Technical Support Information
2-135