Enterasys N Standalone (NSA) Series Configuration Manual page 356

Configuring LACP
Configuring Link Aggregation
padminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync |
lacpcollect |
lacpdist | lacpdef |
lacpexpire | all
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all link aggregation parameters for port ge.3.16:
Matrix(rw)->clear port lacp port ge.3.16
4-120 Matrix NSA Series Configuration Guide
Clears the port's specific partner admin state, or all
partner admin state(s).