Clear Spantree Portenable - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.2.3

clear spantree portenable

Use this command to reset the default value for one or more Spanning Tree ports to enabled.
clear spantree portenable port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the default Spanning Tree port status value to enabled on fe.1.12:
Matrix(rw)->
Specifies port(s) to reset. For a detailed description of
possible port-string values, refer to
clear spantree portenable fe.1.12
Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
Matrix NSA Series Configuration Guide
Section 4.1.1.
6-95