4.3.1.8
clear console flowcontrol
Use this command to clear the type of flow control for one or more console ports.
clear console flowcontrol [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, flow control will be cleared for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear flow control for console port com.1.1:
Matrix(rw)->clear console flowcontrol com.1.1
(Optional) Clears flow control for specific console port(s).
Port Configuration Command Set
Setting Console Port Properties
Matrix NSA Series Configuration Guide
4-13