Show Spantree Adminpoint - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.2.23

show spantree adminpoint

Use this command to display the administrative point-to-point status of the LAN segment attached
to a Spanning Tree port.
show spantree adminpoint [port port-string]
Syntax Description
port port-string
Command Defaults
If port-string is not specified, status will be displayed for all Spanning Tree port(s).
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the point-to-point status of the LAN segment attached to fe.2.7:
Matrix(rw)->show spantree adminpoint port fe.2.7
Port fe.2.7 has a Port Admin Point to Point of Auto
(Optional) Displays point-to-point status for specific
port(s). For a detailed description of possible port-string
values, refer to Section
Matrix NSA Series Configuration Guide
Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
4.1.1.
6-115