Show Reset - Enterasys N Standalone (NSA) Series Configuration Manual

General Configuration Command Set
Resetting the Device
2.2.11.1

show reset

Use this command to display information about scheduled device resets.
show reset
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This command shows how to display reset information
Matrix(rw)->show reset
Reset scheduled for Fri Jan 21 2000, 23:00:00 (in 3 days 12 hours 56 minutes 57
seconds).
Reset reason: Software upgrade
2-128 Matrix NSA Series Configuration Guide