Enterasys N Standalone (NSA) Series Configuration Manual page 211

Network Policy
(app/tag/vlanId/cos/dscp)
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer
Model Number
Note that the information fields displayed by the show lldp port remote-info command will vary,
depending on the type of remote device that is connected to the port.
Table 3-5 describes the output fields that are unique to the remote system information database.
Refer to Table 3-4 on page 34 for descriptions of the information fields that are common to both the
local and the remote system information databases.
Table 3-5 show lldp port remote-info Output Display
Output Field
Remote Port Id
Device Type
Hardware Revision
Firmware Revision
Sofware Revision
Serial Number
Manufacturer
Model Number
Asset ID
: voice/untagged/0/6/46
: 4610D01A
: b10d01b2_7.bin
: a10d01b2_7.bin
: 05GM42004348
: Avaya
: 4610
What it Displays ...
Displays whatever port Id information received in the LLDPDU from
the remote device. In this case, the port Id is MAC address of remote
device.
Mandatory LLDP-MED Capabilities TLV. Displayed only when the
port is connected to an LLDP-MED-capable endpoint device.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component.
LLDP-MED Extensions Inventory Management TLV component. In
the above example, no asset ID was received from the remote device so
the field is not displayed.
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
Matrix NSA Series Configuration Guide 3-39