Clear Cos Port-Resource Txq - Enterasys N Standalone (NSA) Series Configuration Manual

8.3.3.14

clear cos port-resource txq

Use this command to clear one or all Class of Service transmit queue port resource entry.
clear cos port-resource txq all | group-type-index resource[unit] [rate]
[algorithm]
Syntax Description
all |
group-type-index
resource
unit
rate
algorithm tail-drop (Optional) Clears algorithm settings.
Command Defaults
If no options are specified, all associated non-default settings will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all port resource settings associated with Class of Service transmit
queue 1 in port group 0.1:
Matrix(rw)->clear cos port-resource txq 0.1 1
Policy Classification Configuration Command Set
Clears all transmit queue port resource entries or a
specific entry.
Specifies a resource entry to be cleared.
(Optional) Clears unit of measure settings.
(Optional) Clears rate settings.
Matrix NSA Series Configuration Guide
Configuring Policy Class of Service (CoS)
8-67