Enterasys N Standalone (NSA) Series Configuration Manual page 376

SNMP Configuration Command Set
Configuring SNMP Users, Groups and Communities
Examples
This example shows how to display an SNMP user list:
Matrix(rw)->show snmp user list
--- SNMP user information ---
--- List of registered users:
Guest
admin1
admin2
netops
This example shows how to display information for the SNMP "guest" user:
Matrix(rw)->show snmp user guest
--- SNMP user information ---
EngineId:
Username
Auth protocol
Privacy protocol
Storage type
Row status
Table 5-4
Table 5-4 show snmp user Output Details
Output
EngineId
Username
Auth protocol
Privacy protocol
Storage type
Row status
5-14 Matrix NSA Series Configuration Guide
00:00:00:63:00:00:00:a1:00:00:00:00
shows a detailed explanation of the command output.
= Guest
= usmNoAuthProtocol
= usmNoPrivProtocol
= nonVolatile
= active
What It Displays...
SNMP local engine identifier.
SNMPv1 or v2 community name or SNMPv3 user
name.
Type of authentication protocol applied to this
user.
Whether a privacy protocol is applied when
authentication protocol is in use.
Whether entry is stored in volatile, nonvolatile or
read-only memory.
Status of this entry: active, notInService, or
notReady.