Enterasys N Standalone (NSA) Series Configuration Manual page 739

10.4.2.18 show igmp flow
Use this command to display IGMP flow information.
show igmp flows [portlist portlist] [group group] [vlan-list vlan-list] [sip sip]
Syntax Description
[portlist portlist]
[group group]
[vlan-list vlan-list]
[sip sip]
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display all the IGMP flow information:
Matrix(rw)->show igmp counters
Multicast Flows
Src Port
-----------------------------------------------
fe.1.20
fe.1.36
portlist - Port or range of ports.
group - group IP address (none means show all groups)
vlan-list - VLAN ID or range of IDs (1-4094)
sip - source IP address (none means show all sips)
Group Address
224.1.1.1
224.1.1.2
IGMP Configuration Command Set
Vlan Src IP
1 45.67.89.23
1 39.47.23.67
Matrix NSA Series Configuration Guide
Configuring IGMP
10-27