Table of Contents
Advertisement
Logging And Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
11.2.6.6
set sntp broadcastdelay
Use this command to set the round trip delay, in microseconds, for SNTP broadcast frames.
set sntp broadcastdelay time
Syntax Description
time
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the SNTP broadcast delay to 12000 microseconds
Matrix(rw)->set sntp broadcastdelay 12000
11-128 Matrix NSA Series Configuration Guide
Specifies broadcast delay time in microseconds. Valid
values are 1 to 999999. Default value is 3000.
:
Advertisement
Chapters
Table of Contents
