Enterasys N Standalone (NSA) Series Configuration Manual page 679

Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to configure Class of Service port resource IRL entry 0 for port group 0.1
assigning an inbound rate limit of 512 kilobits per second This entry will trigger a Syslog and an
SNMP trap message if this rate is exceeded:
Matrix(rw)->set cos port-resource irl 0.1 0 unit kbps 512 syslog enable trap
enable
Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix NSA Series Configuration Guide 8-63