Clear Physical Alias - Enterasys N Standalone (NSA) Series Configuration Manual

General Configuration Command Set
Setting Basic Device Properties
2.2.3.35

clear physical alias

Use this command to reset the alias for a physical object to a zero-length string.
clear physical alias {[chassis] [slot slot] [backplane backplane] [module
module] [powersupply powersupply] [powersupply-slot powersupply-slot] [fan]
[fan-slot] [port-string port-string]}
Syntax Description
chassis
slot slot
backplane
backplane
module module
powersupply
powersupply
fan
port-string
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set clear the alias set for the chassis:
Matrix(rw)->clear physical alias chassis
2-86 Matrix NSA Series Configuration Guide
Clears the chassis alias.
Clears and alias for a specific slot.
Clears and alias for a specific backplane. Valid values are
1 for FTM 1 and 2 for FTM 2.
Clears an alias for a specific module.
Clears an alias for a specific power supply. Valid values
are 1 or 2.
Clears the fan tray alias
Clears an alias for a specific port.