Clear Spantree Lpcapablepartner; Set Spantree Lpthreshold - Enterasys C3G124-24 Configuration Manual

clear spantree lpcapablepartner

Defaults
If no port-string is specified, Loop Protect capability for link partners is displayed for all ports.
Mode
Switch command, read-only.
Example
This example shows how to display the Loop Protect partner capability for ge.1.1:
C3(rw)->show spantree lpcapablepartner port
Link partner of port
clear spantree lpcapablepartner
Use this command to reset the Loop Protect capability of port link partners to the default state of
false.
Syntax
clear spantree lpcapablepartner port-string
Parameters
port-string
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to reset the Loop Protect partner capability for ge.1.1:
C3(rw)->clear spantree lpcapablepartner

set spantree lpthreshold

Use this command to set the Loop Protect event threshold.
Syntax
set spantree lpthreshold value
Parameters
value
13-50 Spanning Tree Configuration
ge.
1.1 is not LoopProtect-capable
Specifies port(s) for which to clear their link partners' Loop Protect
capability (reset to false).
ge.
Specifies the number of events that must occur during the event
window in order to lock a port/SID. The default value is 3 events. A
threshold of 0 specifies that ports will never be locked.
ge.
1.1
1.1