Show Spantree Lplock - Enterasys N Standalone (NSA) Series Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
6.2.3.4

show spantree lplock

Use this command to display the Loop Protect lock status per port and/or per SID. A port can
become locked if a configured number of Loop Protect events occur during the configured window
of time. See the set spantree lpthreshold
forced into blocking (locked), it remains locked until manually unlocked with the
lplock command.
show spantree lplock [port port-string] [sid sid]
Syntax Description
port-string
sid sid
Command Defaults
If no port-string is specified, status is displayed for all ports.
If no SID is specified, SID 0 is assumed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display Loop Protect lock status on ge.1.1:
Matrix(rw)->show spantree lplock port ge.1.1
LoopProtect Lock status for port ge.1.1
6-124 Matrix NSA Series Configuration Guide
and set spantree lpwindow
(Optional) Specifies port(s) for which to display the Loop
Protect lock status. For a detailed description of possible
port-string values, refer to
(Optional) Specifies the specific Spanning Tree(s) for
which to display the Loop Protect lock status. Valid values
are 0 - 4094. If not specified, SID 0 is assumed.
commands. Once a port is
clear spantree
Section 4.1.1.
, SID 0 is UNLOCKED.