Show Rmon Topn - Enterasys N Standalone (NSA) Series Configuration Manual

Logging And Network Management Command Set
Configuring RMON

11.2.4.19 show rmon topN

Use this command to displays RMON TopN properties and statistics. TopN monitoring prepares
tables that describe the hosts topping a list ordered by one of their statistics. TopN lists are samples
of one of the hosts base statistics over a specific interval.
set rmon topN [index]
Syntax Description
index
Command Defaults
If index is not specified, information about all entries will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display all RMON TopN properties and statistics. A control entry
displays first, followed by actual entries corresponding to the control entry
Matrix(rw)->show rmon topN
--------------------
Index
Status
Owner
Start Time
HostIndex
Rate Base
Duration
Time Remaining = 0
Requested Size = 10000
Granted Size
Report 1
-------------------
Rate = 3
Address = 0.1.f4.6.2e.40
11-74 Matrix NSA Series Configuration Guide
(Optional) Displays RMON properties and statistics for a
specific entry index ID.
= 1
= 1 valid
= monitor
= 0
= 1
= 1 InPkts
= 10
= 100
: