IGMP Configuration Command Set
Configuring IGMP
10.4.2.17 show igmp reporters
Use this command to display IGMP reporter information.
show igmp reporters [portlist portlist] [group group] [vlan-list vlan-list] [sip
sip]
Syntax Description
[portlist portlist]
[group group]
[vlan-list vlan-list]
[sip sip]
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the all IGMP reporter information :
Matrix(rw)->show igmp reporters
IGMP Reporters
Port
---------------------------------------------------------------
lag.0.2
lag.0.2
lag.0.2
lag.0.2
lag.0.4
lag.0.4
10-26 Matrix NSA Series Configuration Guide
portlist - Port or range of ports.
group - group IP address (none means show all groups)
vlan-list - VLAN ID or range of IDs (1-4094)
sip - source IP address (none means show all sips)
Group Address
Vlan Source IP ExpireTime(Sec) Flags
224.0.0.251
239.255.12.43
239.255.255.250 1
239.255.255.250 20
235.80.68.83
239.255.255.250 20
1
Any
252
1
Any
253
Any
255
Any
249
20
Any
237
Any
243
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC
DYNAMIC