Show Spantree Maxage - Enterasys N Standalone (NSA) Series Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.33

show spantree maxage

Use this command to display the Spanning Tree maximum aging time.
show spantree maxage
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the Spanning Tree maximum aging time:
Matrix(rw)->
Bridge Max Age Time is set to 20 seconds
6-46 Matrix NSA Series Configuration Guide
show spantree maxage