Set Netflow Export-Version - Enterasys N Standalone (NSA) Series Configuration Manual

11.2.8.10 set netflow export-version

Use this command to set the NetFlow flow record format used to export data. Refer to Version
Support on page 153
config command (Section
set netflow export-version {5 | 9}
Syntax Description
5 | 9
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Example
This example shows how to set the flow record format to Version 9
Matrix(rw)->set netflow export-version 9
for more information about NetFlow version support. Use the show netflow
11.2.8.1) to display the current NetFlow version.
Specify the NetFlow flow record format to use when
exporting NetFlow packets, either Version 5 or 9.
The default is Version 5.
Logging And Network Management Command Set
:
Matrix NSA Series Configuration Guide
Configuring NetFlow
11-165