............................................................................................................................................................................................................................................................

new LC™ optic attenuators are designed to provide flat spectral loss across the full

spectrum, allowing the attenuators to be used in the 1300-nm, 1400-nm, and 1500-nm

bands.

Figure D-2 LC-type LBO

Assembly of LC-type LBO into LC block

The LC-type LBOs are installed into the LC-type connector by aligning the alignment key

with the slot in the connector port and pushing the LBO into the port until it snaps into

place.

Figure D-3 LC-type LBO inserted into LC-type connector port

Removal of LC-type LBO from LC block

The LC-type LBOs are removed from the LC-type connector port by depressing the tab to

release the LBO and then pulling straight out.